YOKOGAWA SL1400 - Page 323

11-5
IM 701240-01E
Waveform Analysis/Search
3
2
1
4
5
6
7
8
9
10
11
11
12
13
14
15
16
17
18
App
Index
11.2 Searching History Memory Data Using Zones
(History Search Function)
<For a description of this function, refer to page 2-43.>
Procedure
1. Press HISTORY.
2. Press the Search Mode soft key. The search mode menu appears.
3. Press the Zone soft key.
Setting the Search Zone
4. Press the Search Setup soft key. The search setup menu appears.
5. Press the Select Zone soft key. The search condition selection menu appears.
6. Press any of the Zone1 to Zone4 soft keys to select the zone to which to set the
search condition.
Setting the Search Condition
7. Press the Condition soft key to select OFF, IN, or OUT.
If you select IN or OUT, a search window appears in the area where the Source
channel is displayed.
Setting the Source Channel
8. Press the Source soft key. The source channel selection menu appears.
9. Press the soft key corresponding to the desired channel to select the source
channel.