YOKOGAWA SL1400 - Page 333

11-15
IM 701240-01E
Waveform Analysis/Search
3
2
1
4
5
6
7
8
9
10
11
11
12
13
14
15
16
17
18
App
Index
For H&V Cursors (When Not Displaying the X-Y Waveform)
1. Press CURSOR.
Selecting the Cursor Type
2. Press the Type soft key. The cursor type selection menu appears.
3. Press the H&V soft key.
Selecting the Waveform to Be Measured
4. Press the Trace soft key.
5. Use jog shuttle+SELECT to select the waveform to be measured.
Moving the Cursor
6. Press the Cursor1 /Cursor2 soft key to set the jog shuttle control to
Cursor1.
7. Turn the jog shuttle to move Cursor1.
8. Likewise, move Cursor2. If the jog shuttle control is set to both Cursor1 and
Cursor2, both cursors are moved.
9. Move Cursor1
and Cursor2 by carrying out steps similar to steps 6 to 8.
11.4 Measuring Waveforms Using Cursors