YOKOGAWA SL1400 - Page 337

11-19
IM 701240-01E
Waveform Analysis/Search
3
2
1
4
5
6
7
8
9
10
11
11
12
13
14
15
16
17
18
App
Index
For H&V Cursors (When Displaying the X-Y Waveform)
1. Press CURSOR.
Selecting the Cursor Type
2. Press the Type soft key. The cursor type selection menu appears.
3. Press the H&V soft key.
Selecting the Waveform to Be Measured
4. Press the Trace soft key.
5. If X Axis of the DISPLAY menu is set to Single, use jog shuttle+SELECT to
select the trace. If X Axis is set to Quad, press the soft key corresponding to the
X-Y waveform (XY1 to XY4) to select the waveform to be measured.
Moving the Cursor
6. Press the Cursor1 /Cursor2 soft key to set the jog shuttle control to
Cursor1.
7. Turn the jog shuttle to move Cursor1.
8. Likewise, move Cursor2. If the jog shuttle control is set to both H Cursor1 and H
Cursor2, both cursors are moved.
9. Move Cursor1
and Cursor2 by carrying out steps similar to steps 6 to 8.
11.4 Measuring Waveforms Using Cursors