YOKOGAWA SL1400 - Page 364

12-9
IM 701240-01E
Printing the Screen Image
3
2
1
4
5
6
7
8
9
10
11
12
12
13
14
15
16
17
18
App
Index
• Annotation
Channel information, channel messages, or measured values are printed. Use
Annotation to select the print interval from OFF, 200 mm, 400 mm, and 800 mm.
Use Type to select the type of annotation to be printed from Ch Information, Ch
Message, and Ch Data.
Ch Information
Prints settings such as V/div, filter, and module.
Ch Message
Prints the character string (up to 80 characters) that is assigned to each channel.
Ch Data
Prints the measured values at a given interval using numeric values.
The position where annotations are printed varies depending on the display
(recording) format and extra area settings as follows:
• When Format is 1 Zone, 2 Zone, 3 Zone, or 4 Zone, and Extra Area is ON
The annotations are printed in the extra area. The annotations do not overlap
the waveform print area.
• When Format is 1 Zone, 2 Zone, 3 Zone, or 4 Zone, and Extra Area is OFF
The annotations are printed at the bottom section of the waveform print area.
• When Format is 8 Zone or 16 Zone
The annotations are printed between the divided waveform print areas (between
the grids).
Note
If all of the conditions below are met, only up to 67 characters of CH Message are printed.
Format: 1 Zone/2 Zone/3 Zone/4 Zone, Extra Area: OFF, Scale: Other than OFF
• Comment
A comment string of up to 20 characters can be printed at the top section of the print
area.
Preview
A preview of the print image data can be displayed in the specified output format.
Notes on Fine Print, Zoom Print, and A4 Print
• Fine print, zoom print, and A4 print cannot be carried out while waveform acquisition
is in progress.
• Only Main waveforms are applicable for fine print and A4 print.
• If waveforms are being displayed using the history memory function, only the
waveforms specified by Selected Record No. are applicable for fine print, zoom print,
and A4 print.
• Fine print, zoom print, and A4 print cannot be carried out when X-Y waveforms are
being displayed.
• Fine print, zoom print, and A4 print cannot be carried out on the snapshot and
accumulated waveforms.
• If the number of printed pages exceeds 100, fine print cannot be carried out. (The
number of printed pages is determined by the Print Mag and Time Range settings.)
12.1 Printing on the Built-in Printer