12-15
IM 701240-01E
Printing the Screen Image
12
12.3 Printing on a Network Printer (Option)
<For a description of this function, refer to page 2-49.>
Procedure
Configuring the Network
1. Configure the TCP/IP and network printer according to the procedures given in
section 16.2 and 16.4.
Selecting the Printer
2. Press MENU.
3. Press the PRINT soft key.
4. Press the Print to soft key. The printer selection menu appears. (Net Print
appears only when the Ethernet interface option is installed.)
5. Press the Net Print soft key.
Selecting the Output Format
6. Press the Format soft key.
7. Select the soft key corresponding to the output format from ESC-P to PostScript.
Setting the Color (When Format Is ESC-P, ESC-P2, PCL5, or BJ)
8. Press the Color soft key to select ON or OFF.
Setting a Comment
9. Press the Comment soft key.
10. Enter the comment according to the procedure given in section 4.2.
Setting the Print Resolution (When Format Is BJ)
11. Press the Resolution soft key. The print resolution setup menu appears.
12. Press any of the soft keys corresponding to 180 dpi, 300 dpi, 360 dpi, and 600
dpi.
To Next Page
Loading...
