13-16
IM 701240-01E
Selecting Save Destination Medium
13. Press the File List soft key. The File List window appears.
14. Turn the jog shuttle to select the save destination medium (indicated by [ ]).
15. Press SELECT to confirm the new medium.
Select the Save Destination Directory
(Perform this operation when directories are present on the medium.)
16. Turn the jog shuttle to select the save destination directory (indicated by < >).
17. Press SELECT to confirm the directory. The selected medium/directory is
displayed in “Path=......” located at the upper left of the File List window.
Select <..> to move to the parent directory.
Note
If History is set to All, MATH channels are not saved. If you want to save the data of the
MATH channels, set History to One.
13.8 Saving and Loading Waveform Data
To Next Page
Loading...
