13-52
IM 701240-01E
Explanation
Selecting the Data Type
Real Time
• Data saved using realtime recording.
• The data that is realtime recorded can be loaded to display the waveform and
compute numeric data.
• The extension is .WDF.
Data Size
The maximum data size is as follows: The unit of the record length is word.
(Record length × 2 × (the number of channels + 1) × (1.05 to 1.15)) bytes
[RealTime] Drive
• The WDF data that is created by the realtime recording is saved to the [RealTime]
drive.
• The [RealTime] drive appears only when Data Type is set to Real Time. If you want to
manage the files on the [RealTime] drive, set Data Type to Real Time.
• You can set the size of the RealTime drive in the range of 30% to 70% of the entire
capacity of the internal hard disk. This setting is entered when the internal hard disk is
formatted. For details, see section 13.6.
13.15 Loading/Converting Realtime Recorded Waveforms
To Next Page
Loading...
