13-60
IM 701240-01E
Creating a Directory
1. Press FILE.
2. Press the Utility soft key. The Utility setup menu and the File List window
appear.
3. Press the Function soft key. The file function selection menu is displayed.
4. Press the Make Dir soft key.
Selecting Media and Directories
5. Select the medium and directory according to steps 6 to 9 in section 13.9.
Creating Directories
6. Turn the jog shuttle to select a medium or directory.
7. Press the Dir Name soft key. A keyboard appears.
8. Enter the directory name or file name according to the procedure given in
section 4.2.
Specifying the Files to Be Displayed in the File List Window and Displaying Properties
9. Carry out steps 19 to 21 in section 13.9.
Explanation
Selecting the Storage Medium and Directory: File List
Media on which saving and loading are possible are displayed on the File List window.
• Display Examples of Storage Media
[PC Card]: PC card
[HD]: Hard disk
[SCSI5]: SCSI device with the ID number set to 5
1
[SCSI5-1]: Partition 1 of a CSI device whose ID number is 5
1
[NetWork]: Network drive when the Ethernet interface option is installed)
[USB]: USB storage device
1. When a SCSI device whose ID number is 5 is connected
13.18 Changing the Directory/File Name of the Storage Medium and Creating Directories
To Next Page
Loading...
