15-16
IM 701240-01E
Periodic Mail
The SL1400 status can be sent periodically to a specified mail address on the network.
SL1400 Information That Is Transmitted
• Acquisition Condition
Start/Stop, trigger condition, and acquisition counter
• Error Log Information
Error number and corrective action in English (up to 16 errors)
• Results of Waveform Parameter Measurement
Only when automated measurement of waveform parameters (see section 11.5) is
executed.
The maximum number of measurement results of waveform parameters that are
sent is the same as the maximum number (24) of measurement results displayed
on the SL1400.
Sample Periodic Mail
[Comment] aaaaaa
[ACQ Status] Stopped 162
ErrNo 602 No SCSI device or no media inserted.
Check the SCSI device connection and
the SCSI ID, and make sure that the storage
medium is inserted (if applicable).
Action Mail
Information such as the trigger time can be sent to a specified mail address on the
network as an action of action-on-trigger.
SL1400 Information That Is Transmitted
• Acquisition Condition
Start/Stop, acquisition counter
• Trigger Time
• Results of Waveform Parameter Measurement
Only when automated measurement of waveform parameters (see section 11.5) is
executed.
Sample Action Mail
[Comment] aaaaaa
[ACQ Status] Stopped 1
[Trigger Date and Time] 2002/06/17 17:28:59.38
Max (C1) 4.16667V
SDv (C2) 697.941mV
Freq(C3) 500.0000kHz
+Wd (C4) 1.00us>
15.5 Sending Periodic Mail or Action Mail (SMTP Client Function)
To Next Page
Loading...
