YOKOGAWA SL1400 - Page 482

15-41
IM 701240-01E
Ethernet Interface (Option)
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
15
16
17
18
App
Index
Log Display Example
The following figure shows an example displaying the log of the action-on-trigger.
Displays “Executing...” when action-on-trigger is in execution.
If screen image data or waveform data files is being saved in
the action-on-trigger, the files can be saved on the PC from
the Log display window.
The log displays the save destination drive as follows.
Partition number (or LUN (logical unit number))
Address number
CA0: PC card
SC4: SCSI device with the ID number set to 4*
SC4-1: Partition 1 of a SCSI device whose ID number is 4*
ND0: Network drive (when the Ethernet interface option is installed)
US - : USB storage device
* ID number 4 is the default value for the SL1400 internal hard disk (option).
Note
• When the SL1400 is printing, operating files (file operation from the front panel key or file
transfer using the FTP server function), or realtime recording, files cannot be saved on the
PC. In addition, other Web server functions cannot be used while saving files.
• Files on the network drive (NetWork) cannot be saved to the PC.
15.7 Using the Web Server Function