YOKOGAWA SL1400 - Page 509

17-13
IM 701240-01E
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
17
18
App
Index
Troubleshooting, Maintenance, and Inspection
Executing the Printer Test
12. In step 4, select Printer.
13. Press the Test Exec soft key to execute the printer test.
Executing the PC Card Interface, Internal Hard Disk, and SCSI Tests
14. In step 4, select PC CARD, HDD, or SCSI.
15. Press the Test Type soft key.
16. Turn the jog shuttle to set the test type to #1.
17. Press the Test Exec soft key to execute the test selected in step 14.
Note
• To execute the PC card interface tests, install the PC card beforehand.
• Note the following points when performing a SCSI test.
• Connect the SCSI device.
• Only test unpartitioned SCSI devices.
• Set the SCSI ID to 1.
• Test Item > Calib.Inf. is a menu for servicing (maintenance).
Printer test
PC card
drive test
Internal
HDD test SCSI test
17.3 Self-Diagnostic Test (Self Test)