1: General Description
Specifications
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 7
Encoding Options and Specifications
• Magnetic stripe encoder – ISO 7811 (new and re-encoded, tracks 1, 2, and 3, high
and low coercivity, stripe down, 30-mil card only
• * Smart card contact station ISO 7816
• * Combined MIFARE
®
ISO 14443 (13.56 MHz) and ISO 7816 Contact Encoder
Specifications – PC/SC and EMV level 1 certified (50-card capacity [30 mil]
external card hopper)
• Encoding over USB and Ethernet
Optional Features
• * Built-in 10/100 Ethernet connectivity
• *Manual Card Feed mode
• ZebraCare™ extended product warranty programs
• * Lockable enclosure with obscure output bin
Communications Interfaces
• USB V2.0 (cable included) – standard
• * Built-in 10/100 Ethernet – optional
Card Compatibility
NOTE: For optimum print quality and printer performance, use of Zebra genuine
supplies is recommended.
• Card Thickness: 10–40 mil
• Card Size: CR-80, ISO 7810 format, Type ID-1, 2.12-inch (54 mm) x 3.38-inch (86
mm)
• Card Material: PVC and PVC composite
• Smart Card Contact: ISO 7816-1, 2, 3, 4
• Smart Card Contactless: MIFARE® ISO 14443A/B
• Spot color/monochrome print image only is supported on < 20 mil card thickness
Preventative Maintenance
• Zebra recommends cleaning the printer on a regular basis using standard Zebra printer
parts and cleaning supplies; see Preventive Maintenance for details.
* Field upgradeable options