1: General Description
Specifications
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 9
Electrical Specifications
• Auto-switching single-phase AC power
• Operating range: 90–132VAC and 190-264VAC RMS.
• Frequency range: 47–63 Hz.
• Power requirement is 100W max continuous and 607W peak (for 450 µ
sec)
output power
• FCC Class A
Environmental Specifications
• Operating Temperature: 60–86º F (15–30º C)
• Storage Temperature: 23–158º F (-5–70º C)
• Operating Humidity: 20–65% non-condensing
• Storage Humidity: 20–70% non-condensing
• Media Storage:
- Temperature: 41–77°F (5–25°C)
- Humidity: 35–65% non-condensing
- Store in dark location
Agency Approvals
Zebra ZXP Series 3 Card Printer complies with following applicable directives and
standards for the ITE: Residential, Commercial & Light Industry environments
• For US/Canada/Mexico/Australia & NZ
- FCC Class A, cfr47, Part 15 Subpart J
- FCC 15.257 2008, Part 15 Subpart C
- Canadian STD RSS-210
- NOM-ETL (Mexico)
- IEC 60950-1:2005+A1:2009 Safety Standard (TUV & NRTL)
- C-Tick (Australia) Electromagnetic Radiation Standard
•For Europe:
- Applicable Directives and Supporting Standards:
2004/108/EC EMC Directive, EN55022:2010 Class A,
EN55024:2010, EN61000-3-2:2006+A2:2009,
EN61000-3-3:2008, 2006/95/EC LVD Directive,
EN60950-1:2006+A11:2009+A1:2010+A12:2011, CB Scheme
- RFID Enabled
Applicable Directives and Supporting Standards:
99/5/EC R&TTE Directive, EN 301 489-3 V1.4.1,
EN 300 330 V1.5.1