H: Upgrade Kit Instructions
MIFARE & Contact
P1061317-002 Zebra ZXP Series 3 Card Printer Service Manual 309
MIFARE & Contact
Upgrade Kit Instructions
Introduction
These instructions describe installing MIFARE & Contact Upgrade Kit P1031925-204 in a
Zebra ZXP Series 3 Card Printer.
In general, only removal directions are presented; unless otherwise noted, replacement would
be performed by reversing the removal steps.
Caution • This kit may only be installed by Zebra trained and certified personnel. Any
attempt to install it by other than Zebra trained and certified personnel will void the
product warranty and may cause damage to the equipment.
To Next Page
Loading...
