30 Zebra ZXP Series 3 Card Printer Service Manual P1061317-002
2: Installation and Setup
Installing the Windows Printer Driver
Step 15. When the InstallShield Wizard Complete window appears, click the Finish button.
Step 16. This completes the Ethernet driver installation.
Note • You may need to change the card setup (card orientation, ribbon type, etc.), encoding,
overlay, and/or black panel settings via the Printer Driver; see Card Printer Printing
Preferences on page 48.
Note • You may also need to set the card thickness adjustment to the thickness of the cards
being used; see Loading Cards on page 68.
To Next Page
Loading...
