A96G166/A96A166/A96S166 User’s manual Revision history
Modified temperature specification.
Updated “20.3 A/D converter characteristics” on page 202.
Updated “20.5 Power on reset characteristics” on page 203.
Updated “20.6 Low voltage reset and low voltage indicator
characteristics” on page 204.
Modified “Low voltage reset and low voltage indicator characteristics”
Changed the name of P1DB to P12DB at Table 3. SFR Map Summary.
Changed the name of each bit for P12DB at P12DB register description.
Corrected the I/O symbol of LED0 ~ LED7 to O at Table 2. Normal Pin
Description.
Corrected an address typo of FPCR0, RTOCH0 and RTOCL0 register at
Table 28. USART Register Map and 15.12 Register description.
Deleted AVREF at Figure 58. 12-bit ADC Block Diagram.
Deleted Figure 58. A/D Power (AVREF) Pin with a Capacitor.
Changed the maximum analog input voltage to VDD at Table 45. A/D
Converter Characteristics.
Updated Basic Interval Timer Block Diagram at Figure 27.
Added the description of V
LVD
/V
LVI
at Table 49. LVR and LVI
Characteristics.
Extended maximum operating temperature up to 105C as well as 85C.
Enhanced the minimum ADC operation voltage to 2.2V at Table 45. A/D
Converter Characteristics.
Deleted Analog Reference Voltage item at Table 45. A/D Converter
Characteristics.
Added the note of “Guaranteed by design” at Table 46. Recommended
ADC Resolution.
Corrected the conditions of Input High/Low Leakage Current and Supply
Current at Table 52. DC Characteristics.
Corrected the symbol of package type at Figure 144.
A96G166/A96A166/A96S166 Device Numbering Nomenclature.
Added 16 SOPN package at Figure 2. A96G166 16SOPN Pin
Assignment, Table 2. Normal Pin Description and Figure 126 16 SOPN
Package Outline.
Added A96G166AE at Table 66. A96G166/A96A166/A96S166 Device