Precautions
Subject to Export Control, see Cover Page for details.
viii
Lithium
A Lithium battery is used in this equipment.
Lithium is a toxic substance so the battery should in no circumstances be crushed, incinerated or
disposed of in normal waste.
Do not attempt to recharge this type of battery. Do not short circuit or force discharge since this
might cause the battery to vent, overheat or explode.
Tilt Feature
Do not stack other instruments on top of unit when instrument is in the tilt position.
Input Overload
On the RF N-type connector, the input power should not exceed 125 W (+51 dBm).
On the RF TNC connector, the input power should not exceed 10 mW (+10 dBm).
Static Sensitive Components
This equipment contains components sensitive to damage by Electrostatic Discharge (ESD). All
personnel performing maintenance or calibration procedures should have knowledge of accepted
ESD practices and/or be ESD certified.
To comply with EMC requirements, double shielded cables should be used for making
connections to all input and output connectors.
Suitability for Use
This equipment has been designed and manufactured by Aeroflex to generate, receive and analyze
RF/audio signals.
If the equipment is not used in a manner specified by Aeroflex, the protection provided by the
equipment may be impaired.
Aeroflex has no control over the use of this equipment and cannot be held responsible for events
arising from its use other than for its intended purpose.
CAUTION
THIS EQUIPMENT CONTAINS PARTS
SENSITIVE TO DAMAGE
BY ELECTROSTATIC DISCHARGE (ESD)
To Next Page
Loading...
