Installation
Subject to Export Control, see Cover Page for details.
2-9
Ethernet and USB Connectors
The Ethernet and USB connections provide a standard Base T RJ45 and two standard USB
connectors. The USB connections allow the use of USB Version 1.1 devices.
Fig. 2-10 Ethernet and USB Connector Pin Locations
Ethernet Connector pin functions are as follows:
See also Ethernet Connector in Chapter 3, Test Set Operation.
USB Connector
The USB Connector is a twin USB standard connection. Recommended USB memory device is
Aeroflex PN 7110-1100-400.
USB Slave Connector
Connector is reserved for future development.
1
1
5
Pin Number Signal Type Signal Name I/O
1DATATx (+)OUT
2DATATx (-)OUT
3DATARx (+)IN
4DATARx (-)IN
5GNDGNDGND
6GNDGNDGND
7GNDGNDGND
8GNDGNDGND
Pin Number Signal Type Signal Name I/O
1PWRVCC
2 DATA (-) DATA I/O
3DATA(+) DATAI/O
4PWRGND
5PWRVCC
6 DATA (-) DATA I/O
7DATA(+) DATAI/O
8PWRGND
To Next Page
Loading...
