Aeroflex 3901 - S el Ec T I Ng Aut O Tes T II; Exi T in G Au T O te St I I; Aut Ote St II F Ile Na Me Fo Rm at

AutoTest II Sytem Operation
Subject to Export Control, see Cover Page for details.
6-2
Selecting AutoTest II
AutoTest II Systems are only available when the necessary option is installed in the Test Set. To
select AutoTest II:
1. Press CONFIG Key to access the CONFIG Floating menu.
2. Select Systems, AutoTest II from the CONFIG Floating Menu.
3. After AutoTest II loads the display appears as shown in example below. The name of the last
ran script is shown at the top of the Tile; all other data fields appear empty.
Fig. 6-2 AutoTest II Main Tile
AutoTest II is only available when the corresponding System AutoTest II Option is installed in the
Test Set. AutoTest II Options are:
● AutoTest II Analog (390XOPT059)
● AutoTest II P25 (390XOPT218)
● AutoTest II HPD (390XOPT303)
Exiting AutoTest II
AutoTest II does not currently support remote command functionality to switch from AutoTest II to a
different operating system. AutoTest II can only be exited by locally selecting a different system
from the CONFIG, Systems menu.
To exit AutoTest II:
1. Press CONFIG Key.
2. Select the desired operating system from the Systems menu.
AutoTest II File Name Format
AutoTest II supports test scripts with .tcl file extension. Do not include spaces in AutoTest II file
names.