Aeroflex 3901 - Page 288

Optional Systems
Subject to Export Control, see Cover Page for details.
F-2
TETRA DM Provides features for testing TETRA
Mobile Direct Mode call setup and
parameters.
390XOPT112
TETRA Energy
Economy Mode
Provides features for selecting a
specific energy economy mode to
enable the Test Set to operate in a
power saving capacity when
communicating with a mobile.
390XOPT114 Requires TETRA MS
Option (390XOPT110)
P25 Provides the ability to transmit and
receive P25 modulated signals and to
perform RF and modulation
measurements on P25 radios and
systems.
390XOPT200 Includes Vocoder Option
(390XOPT216)
Includes DES Encryption
(390XOPT202)
Trunking Provides features for testing all bands
of Trunked P25 radios and systems.
390XOPT201 Requires 390XOPT200
LSM Provides features for testing
Motorola® Linear Simulcast
Modulation and enables EVM Meter.
390XOPT204 Requires 390XOPT200
Explicit Mode
VHF / UHF
Enables all bands for P25 Trunking
Explicit Mode of operation.
390XOPT212 Requires 390XOPT200
and 390XOPT201
Vocoder Provides data and voice encryption/
decryption capabilities. The Vocoder
option requires installation of
additional hardware (factory installed
only).
390XOPT216 All P25 Options and
HPD® Options
(e.g., 390XOPT200 or
390XOPT300)
P25 Occupied
Bandwidth Power
Enables P25 Occupied Bandwidth
Power Meter and relevant RCI
commands.
390XOPT250 Requires 390XOPT200
AutoTest II The AutoTest II option provides an
interface between the Test Set’s
AutoTest System and remote
command functionality.
AutoTest II Analog 390XOPT059
AutoTest II P25 390XOPT218
AutoTest II HPD 390XOPT303
HPD Testing
Option
Provides the ability to transmit and
receive Motorola HPD modulated
signals and to perform RF and
modulation measurements on Motorola
HPD radios and systems.
390XOPT300 Only available through
Motorola.
Includes Vocoder Option
(390XOPT216)
HPD Advanced
Analysis Package
Provides the additional test and
measurement capabilities for Motorola
HPD modulated signals and additional
data analysis operation.
390XOPT301 Requires HPD Testing
Option (390XOPT300)
Option available only
through Motorola
System Features Provided Option # Special Notes