Appendix G
Subject to Export Control, see Cover Page for details.
G-2
Error Number -113
"Undefined header"
Issued Remote Command does not define action to be performed.
i.e., :SA:TRAC:AVER:VAL command must include “?” to define command as a query command
or include a numeric value to define command as a set command.
Error Number -121
"Invalid character in number"
Character entered is not valid for selected parameter.
Error Number -123
"Exponent too large"
Number of digits entered exceeds maximum allowed.
Error Number -124
"Too many digits"
Number of digits entered exceeds maximum allowed.
Error Number -128
"Numeric data not allowed"
Selected parameter requires text data.
Error Number -131
"Invalid suffix"
Invalid unit of measurement has been defined in relation to specified measurement.
i.e., specifying dBm as the unit of measurement for a frequency parameter.
Error Number -141
"Invalid character data"
Text entered is invalid for selected parameter.
Error Number -144
"Character data too long"
Text stream exceeds maximum allowed for selected parameter.
Error Number -148
"Character data not allowed"
Selected parameter only accepts numeric entries.
Error Number -151
"Invalid string data"
Remote Command contains error in data string.
i.e., :TBS:CONF:CHPL:NEW plan_name contains more than 20 characters permitted.
Error Number -158
"String data not allowed"
Remote Command contains parameters not permitted in command script.
i.e., :TBS:CONF:CHPL:NEW defining Block 2 data when Block 2 has not been included (INCL) in
Channel Plan.
To Next Page
Loading...
