Appendix G
Subject to Export Control, see Cover Page for details.
G-4
Execution Errors
Execution Errors are generated immediately to warn users when the Test Set is unable to
perform a requested action. Execution Error messages are displayed for 3 seconds before they
disappear.
Error Number 221
"Settings conflict"
Attempting to configure a setting that is currently invalid.
(.e., Trying to route a filtered audio signal to the speaker, but a filter is not selected/defined.
Error Number -222
"Data out of range"
Value entered exceeds Test Set range. User must re-define value.
"Data out of range:Value truncated"
Value exceeds maximum number of characters for specified field. Test Set automatically
shortens string to fit within defined parameter.
"Data out of range:Value ignored"
Value exceeds Test Set range. Test Set ignores value and retains previous setting.
"Data out of range:Value clipped to upper level"
Value exceeds Test Set range. Test Set reduces upper level to maximum permitted value.
i.e., maximum setting for Upper Limit Analog Duplex Depth measurements is 100%. Attempting
to set to 101% generates this error message and Test Set sets value to 100%.
"Data out of range:Value clipped to lower level"
Value exceeds Test Set range. Test Set reduces lower level to minimum permitted value.
i.e., minimum setting for Lower Limit Analog Duplex Depth measurements is 0.0%. Attempting to
set to a negative value generates this error message and Test Set sets value to 0.0%.
"Data out of range: Value clipped to next upper level"
Value entered is higher than upper range of Test Set. Value is automatically set to highest
available value.
Error Number 253
"Corrupt media(memory)"
External media (computer) is corrupt.
Error Number 254
"Media(memory) full"
External memory device (i.e., USB memory device) is full.
Error Number 256
"File not found"
Test Set is unable to locate specified file.
Error Number 257
"File name error"
File name is invalid. It may contain invalid characters or exceed maximum number of characters
permitted for type of file.
To Next Page
Loading...
