Agilent Technologies 4288A

148 Chapter 10
Command Reference
:CALC1:MATH:EXPR:NAME
:CALC1:MATH:EXPR:NAME
Syntax :CALCulate1:MATH:EXPRession:NAME {DEV|PCNT}
:CALCulate1:MATH:EXPRession:NAME?
Description Specifies the expression of the primary parameter used when displaying the measurement
result in the deviation measurement mode.
Parameters
Query response {DEV|PCNT}<newline><^END>
Related commands :CALC1:MATH:STAT on page 149
:CALC2:MATH:EXPR:NAME on page 151
:DATA {REF1|REF2} on page 172
Equivalent key
sequence
[∆ Mode]( [Blue] - [Meas Prmtr] ) - Pri
Description
DEV
(initial value)
Displays the result in the difference between the measurement
value and the reference value
*1
(measurement value - reference
value).
PCNT Displays the difference between the measurement value and the
reference value
*1
in a percentage
*2
to the reference value.
*1.Use the :DATA {REF1|REF2} command to set the reference value.
*2.(Measurement value - reference value) / reference value× 100