Agilent Technologies 4288A

146 Chapter 10
Command Reference
:CALC:COMP:SEC:STAT
:CALC:COMP:SEC:STAT
Syntax :CALCulate:COMParator:SECondary:STATe {ON|OFF|1|0}
:CALCulate:COMParator:SECondary:STATe?
Description Sets whether to enable sorting judgment for the measurement result of the secondary
parameter when using the comparator function.
Parameters
Query response {1|0}<newline><^END>
Related commands :CALC:COMP:SEC:LIM on page 145
:CALC:COMP:PRIM:BIN{1-9}:STAT on page 143
:CALC:COMP on page 134
Equivalent key
sequence
[Comprtr]( [Blue] - [1] ) - Limit - Sec
Description
ON or 1
(initial value)
Enables sorting judgment for the measurement result of the
secondary parameter.
OFF or 0 Disables sorting judgment for the measurement result of the
secondary parameter.