Chapter 10 135
Command Reference
:CALC:COMP:AUXB
10. Command Reference
:CALC:COMP:AUXB
Syntax :CALCulate:COMParator:AUXBin {ON|OFF|1|0}
:CALCulate:COMParator:AUXBin?
Description Turns ON/OFF the AUX_BIN function for sorting of the comparator function.
Depending on the ON/OFF state of the AUX_BIN function, the following difference
occurs in the sorting result when the measurement result of the secondary parameter
exceeds the limit range.
ON: Sorted into AUX_BIN if the measurement result of the primary
parameter is within the limit range. Otherwise, sorted into
OUT_OF_BINS.
OFF: Always sorted into OUT_OF_BINS.
Parameters
Query response {1|0}<newline><^END>
Equivalent key
sequence
[Comprtr]( [Blue] - [1] ) - Aux
:CALC:COMP:BEEP
Syntax :CALCulate:COMParator:BEEPer[:STATe] {ON|OFF|1|0}
:CALCulate:COMParator:BEEPer[:STATe]?
Description Turns ON/OFF the beep output.
If you turn off the beep output, the beep sound is not produced, regardless of the sorting
result of the comparator.
This command has the same function as the :SYST:BEEP:STAT command.
Parameters
Query response {1|0}<newline><^END>
Related commands :SYST:BEEP:STAT on page 191
Equivalent key
sequence
[Config]( [Blue] - [-] ) - Beep
Description
ON or 1 Turns ON the AUX_BIN function.
OFF or 0 (initial value) Turns OFF the AUX_BIN function.
Description
ON or 1 (initial value) Turns ON the beep output.
OFF or 0 Turns OFF the beep output.
To Next Page
Loading...
Need help?
General
