Agilent Technologies 4288A User Manual

Chapter 10 177
Command Reference
:DISP:TEXT1:FMSD
10. Command Reference
:DISP:TEXT1:FMSD
Syntax :DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe] {ON|OFF|1|0}
:DISPlay[:WINDow]:TEXT1[:DATA]:FMSD[:STATe]?
Description Determines whether to use the fixed point display when displaying both the primary and
secondary parameters. In the following cases, the fixed point display is always used
regardless of this setting (the value of the highest digit is also fixed).
• When displaying deviation as a percentage in the deviation measurement mode.
• When displaying the results of D and Q of the secondary parameter.
Parameters
Query response {1|0}<newline><^END>
Related commands :DISP:TEXT1:FMSD:DATA on page 178
:CALC1:MATH:EXPR:NAME on page 148
:CALC1:MATH:STAT on page 149
:CALC2:MATH:EXPR:NAME on page 151
:CALC2:MATH:STAT on page 152
Equivalent key
sequence
[Disp Mode]( [Blue] - [Freq] ) - FixMsd - On/Off
Description
ON or 1 Specifies the fixed point display.
OFF or 0 (initial value) Specifies the floating point display.

Agilent Technologies 4288A Specifications

General

Brand	Agilent Technologies
Model	4288A
Category	Measuring Instruments
Language	English