160 Chapter 10
Command Reference
:CORR:LOAD
:CORR:LOAD
Syntax [:SENSe]:CORRection:LOAD[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:LOAD[:STATe]?
Description Turns ON/OFF the LOAD compensation function.
With the LOAD compensation set to ON, if you change the cable length (set with the
:CAL:CABL command) or frequency shift (set with the :SYST:FSH command), the
LOAD compensation is automatically changed to OFF.
Parameters
Query response {1|0}<newline><^END>
Related commands :CAL:CABL on page 133
:SYST:FSH on page 192
:CORR:COLL on page 157
Equivalent key
sequence
[Load]( [Blue] - [6] ) - On/Off
Description
ON or 1 Turns ON the LOAD compensation.
OFF or 0 (initial value) Turns OFF the LOAD compensation.
To Next Page
Loading...
