Appendix A 209
Manual Changes
Manual Changes
A. Manual Changes
Change 1
The firmware revision 1.00 does not support the following function and command. Please
delete their descriptions in this manual.
• External test
• :SYST:TEST? command on page 194
Change 2
The firmware revisions 1.00 and 1.10 do not support the following functions and
commands. Please delete their descriptions in this manual.
• Displaying compensation data in the instrument setup display area
• Selecting parameter format of OPEN/SHORT compensation data
• :CORR:CKIT:STAN1:FORM command on page 154
• :CORR:CKIT:STAN2:FORM command on page 154
To Next Page
Loading...
