Agilent Technologies 4288A

124 Chapter 10
Command Reference
*CLS
IEEE Common Commands
This section describes the IEEE common commands.
*CLS
Syntax *CLS
Description Clears the following. (No query)
•Error Queue
• Status Byte Register
• Standard Event Status Register
• Operation Status Event Register
• Questionable Status Event Register
Equivalent key
sequence
No equivalent key is available on the front panel.
*ESE
Syntax *ESE <numeric>
*ESE?
Description Sets the value of the Standard Event Status Enable Register.
Parameters
If the specified parameter is out of the allowable setup range, the result of bitwise AND
with 255 (0xff) is set.
Query response {numeric}<newline><^END>
Related commands *SRE on page 127
Equivalent key
sequence
No equivalent key is available on the front panel.
<numeric>
Description Setup value of the register
Range 0 to 255
Initial value 0
Resolution 1