Agilent Technologies 4288A User Manual

26 Chapter 3
Setting Up Measurement Conditions and Display
Setting Up Display
Setting Up Display
Turning ON/OFF display
To turn ON/OFF display of the measurement parameter obtained, the measurement signal
level monitored, the handler output (comparator sorting result), the multi-compensation
settings, and the compensation data, use the following command.
• :DISP on page 176
Setting up measurement result display
You can set up the following items related to the measurement result display.
❏ Number of display digits
❏ Fixed point display
• ON/OFF
• Value of highest digit
The following table shows the commands used to set up the above items.
Selecting items displayed in instrument setup display area
To select a display page for the part that displays the instrument setup at the right of the
display (instrument setup display area), use the following command.
• :DISP:TEXT2:PAGE on page 179
Setup item Command
Number of display digits :DISP:TEXT1:DIG on page 176
Fixed point
display
ON/OFF :DISP:TEXT1:FMSD on page 177
Value of highest digit :DISP:TEXT1:FMSD:DATA on page 178

Agilent Technologies 4288A Specifications

General

Brand	Agilent Technologies
Model	4288A
Category	Measuring Instruments
Language	English