Agilent Technologies 4288A

Chapter 10 153
Command Reference
:CALC3:MATH:STAT
10. Command Reference
:CALC3:MATH:STAT
Syntax :CALCulate3:MATH:STATe {ON|OFF|1|0}
:CALCulate3:MATH:STATe?
Description Determines whether to use the monitor function of the current flowing through the DUT
during measurement.
Parameters
Query response {1|0}<newline><^END>
Related commands :CALC4:MATH:STAT on page 153
Equivalent key
sequence
[Level Mon]( [Blue] - [Show Setting] )
:CALC4:MATH:STAT
Syntax :CALCulate4:MATH:STATe {ON|OFF|1|0}
:CALCulate4:MATH:STATe?
Description Determines whether to use the monitor function of the voltage applied to the DUT during
measurement.
Parameters
Query response {1|0}<newline><^END>
Related commands :CALC3:MATH:STAT on page 153
Equivalent key
sequence
[Level Mon]( [Blue] - [Show Setting] )
Description
ON or 1 Enables the current monitor function.
OFF or 0 (initial value) Disables the current monitor function.
Description
ON or 1 Enables the voltage monitor function.
OFF or 0 (initial value) Disables the voltage monitor function.