Agilent Technologies 4288A User Manual

Chapter 10 149
Command Reference
:CALC1:MATH:STAT
10. Command Reference
:CALC1:MATH:STAT
Syntax :CALCulate1:MATH:STATe {ON|OFF|1|0}
:CALCulate1:MATH:STATe?
Description Determines whether to use the function (deviation measurement mode) that displays the
primary parameter measurement result in deviation from the reference value (set using the
:DATA command).
NOTE Changing any of the measurement parameters will automatically disable this function. To
avoid this, you have to write a program so that this command is executed after the
execution of the measurement parameter setup command (:CALC1:FORM and
:CALC2:FORM).
Parameters
Query response {1|0}<newline><^END>
Related commands :CALC1:MATH:EXPR:NAME on page 148
:CALC1:FORM on page 147
:CALC2:FORM on page 150
:CALC2:MATH:STAT on page 152
Equivalent key
sequence
[∆ Mode]( [Blue] - [Meas Prmtr] ) - Pri
Description
ON or 1 Enables the deviation measurement mode.
OFF or 0 (initial value) Disables the deviation measurement mode (in other
words, displays the measurement result in an absolute
value).

Agilent Technologies 4288A Specifications

General

Brand	Agilent Technologies
Model	4288A
Category	Measuring Instruments
Language	English