Chapter 10 163
Command Reference
:CORR:OFFS
10. Command Reference
:CORR:OFFS
Syntax [:SENSe]:CORRection:OFFSet[:STATe] {ON|OFF|1|0}
[:SENSe]:CORRection:OFFSet[:STATe]?
Description Turns ON/OFF the offset compensation function.
NOTE Changing this parameter will automatically turn off this function. To avoid this, you have
to write a program so that this command is executed after the execution of the
measurement parameter setup command (:CALC1:FORM and :CALC2:FORM).
Parameters
Query response {1|0}<newline><^END>
Related commands :CORR:OFFS:DATA on page 164
:CALC1:FORM on page 147
:CALC2:FORM on page 150
Equivalent key
sequence
[Offset]( [Blue] - [3] ) - On/Off
Description
ON or 1 Turns ON the offset compensation function.
OFF or 0 (initial value) Turns OFF the offset compensation function.
To Next Page
Loading...
