Understanding Your Agilent ChemStation 37
Agilent ChemStation Features
1
The ChemStation Directory Structure
SEQUENCE Comprises the default path for sequence templates. The sequence
templates in these directories have a .S extension. Additional
sequence paths can be added using Preferences, see “Preferences
- Sequence Tab” on page 163 and “Sequence Parameters” on
page 165.
VERIFY Comprises data files, methods, and the results of data processing
stored in register (.REG) files. These files execute the ChemStation
verification procedure described in the online help. One set of data,
method, and register files is used for each verification test.
TEMP The TEMP subdirectory comprises temporary work files and the
logbook files. For example, for Instrument 1 the online logbook is
called INSTR1.LOG and the offline logbook is called INSTR1-2.LOG.
LC, GC, CE, MS Instrument driver-specific code such as INI files.
IQT Comprises files the files needed for IQT report creation.
speclibs Comprises spectral libraries.
Table 3 ChemStation subdirectories
Directory Contents
To Next Page
Loading...
Need help?
General
