General Power Meter Functions 2
N1911A/1912A P-Series Power Meters User’s Guide 95
Combined Measurement
Figure 2- 73 shows a Combined Measurement configuration; Channel A,
gate 1 peak power minus gate 3 peak power, to be displayed in the lower
measurement line of the lower display window. (For single channel power
meter (N1911A), the Channel field will be disabled, as shown in
Figure 2- 73).
Figure 2-73 Measurement Setup showing combined configuration
1 Use the , , , , to highlight the Combination function field.
2 Press to display the Function pop- up (see Figure 2- 70) and use
the
and to highlight Combined.
3 Press to complete the entry.
4 Use the , , , , to highlight the measurement type field.
Selected Window/
Function Field
Gate Fields
Measurement Fields
Combination Field
Measurement
The Gate field is disabled if Trigger Acquisition is Free Run.
To Next Page
Loading...
