Agilent Technologies N1911A - Figure 2-54 Trigger Delay Pop-Up; Figure 2-55 Trigger Setting Menu 2

General Power Meter Functions 2
N1911A/1912A P-Series Power Meters User’s Guide 69
Figure 2-54 Trigger Delay pop-up
Complete the entry by pressing the required second, millisecond,
microsecond or nanosecond ( , , or ) softkey.
Press to display the second menu page.
Figure 2-55 Trigger setting menu 2 of 2
s
ms
us
ns
NOTE
The trigger delay time can also be entered or changed in the Trace Display mode when the
Gate Control menu is displayed. See “Setting the Trace Display” on page 118 for further
detail.
1 of 2