2 General Power Meter Functions
38 N1911A/1912A P-Series Power Meters User’s Guide
5 Press to display the Trace Ref Lvl 2 pop- up, and use the numeric
keypad to enter the intended value in the Trace Ref Lvl 2 pop- up window.
Figure 2-22 Trace Ref Lvl 2 pop-up
6 Complete the entry by pressing the softkey.
7 Use the and keys to highlight the Pulse Duration Ref Lvl field.
8 Press to display the Pulse Duration Ref Lvl pop- up, and use the
numeric keypad to enter the intended value in the Pulse Duration Ref Lvl
pop- up.
Figure 2-23 Pulse Duration Ref Lvl pop-up
9 Complete the entry by pressing the softkey.
By default, the Trace Ref Lvl 1, Trace Ref Lv l 2 and Pulse Duration Ref Lvl settings are set
to 10 %, 90 % and 50 % respectively.
To Next Page
Loading...
Need help?
General
