Agilent Technologies N1911A - Setting the CCDF Trace; Figure 9-150 Trace Display Select Control Menu

9CCDF
222 N1911A/1912A P-Series Power Meters User’s Guide
Setting the CCDF Trace
The CCDF Trace display allows you to view the CCDF traces for Channel
A, Channel B, Gaussian and Reference. You can read the data by moving
the markers on the trace. In addition, the difference between markers on
Channel A, Channel B, Gaussian and Reference traces can be observed.
To view the CCDF trace, press , and .
Step 1: Display the Trace
• Press , and select the trace that you wish to
display. The trace which is not selected is grayed out, as in
Figure 9- 150.
Figure 9-150Trace Display Select control menu
Disp Type
CCDF Trace
Trace Control
Trace Display
NOTE
Yellow - Channel A, Red - Channel B, Turquoise - Gaussian and Pink - Reference.