General Power Meter Functions 2
N1911A/1912A P-Series Power Meters User’s Guide 31
Selecting Units of Measurement from the Softkeys
In some menus, for example, units in the Trace Setup menu, you are
required to enter the units of measurement for power. In some cases, due
to the availability of wide power range, the following menu is displayed:
Pressing or increases or decreases
the multiplier shown in front of .Pressing after the correct
multiplier has been selected confirms the entry.
Increment
Decrement
Multiplier
Multiplier
W
Cancel
mW
µW
nW
2 of 2
Invalid softkeys are grayed out so the value cannot be entered.
To Next Page
Loading...
Need help?
General
