EFFECTS EDIT
Page 172 S2000 Operator’s Manual - Version 1.30
Many effects are possible using the ‘autowah’ functions. Effects from ‘wah- wah’ clavinet and
guitar may be created by sweeping just one band (either will do) and more extreme filter sweep
effects can be created by sweeping both. Low width settings on BP1 or BP2 (i.e. tighter ‘bell’)
accentuate the effect.
The phase shifter option in the MOD section can also be enhanced by sweeping one (or both)
of the bandpass frequencies with narrow width settings at exactly the same rate as the phase
shifter.
You could also experiment with setting the AUTOPAN selection in the MOD section to the
same rates so that EQ/filter sweeps pan in synchronisation with each other.
Some of the effects presets utilise these effects - you may like to study them for a better
understanding of what is going on.
The first EQ page allows you to bypass the EQ section but you may also ‘flatten’ the EQ (i.e.
set the parameters so that there is no EQ applied) by setting the LOW and HIGH bands to
500Hz and 00dB and the two MID sections’ level to (the mid bands’ frequencies have no
effect when is set).
To Next Page
Loading...
Need help?
General
