Installation instructions
2
2.1
Basic installation
1. Mount the GPS receiver on the tractor, please
refer to the operating manual for the GPS
receiver.
2. The AMATRON 3 control terminal can be
connected to the tractor basic equipment or
with the ISOBUS wiring.
The tractor basic equipment (console with
distributor) must be mounted in the cab, vibration-
free and with a conductive connection, to the right
of the driver within his view and reach. The
distance from the radio unit or antenna must be at
least 1 m.
3. The paint must be removed from the installation
points in order to prevent electrostatic charge.
CMS-T-00004668-A.1
CMS-T-006367-B.1
2 | Installation instructions
MG5560-EN-II | E.1 | 21.04.2020
5
To Next Page
