Amazone AMATRON 3 - Adding a Worker to a Job

3. Select a controllable implement element.
CMS-I-001730
The menu for selecting the setpoint will be
opened. The setpoints created in the master data
will be shown.
NOTE
If no setpoints are available, the AMATRON 3
automatically opens the menu for creating a
setpoint. In this case, see page 68.
CMS-I-001739
4. Select the desired setpoint from the list.
The selected setpoint is assigned to the
controllable implement element.
CMS-I-001743
10.2.3
Adding a worker to a job
Workers can be assigned to a job to record the
working time for this worker.
CMS-T-004382-B.1
10 | Using the job management
Editing jobs
MG5560-EN-II | E.1 | 21.04.2020
58