Amazone AMATRON 3 User Manual

3. To add an implement or a tractor:
select .
The menu with the selectable implements and
tractors will be shown.
4. Select the desired implement or desired tractor
from the list.
The selected implement or tractor will be added
to the job.
CMS-I-001617
5. To start the working time recording for an
implement or a tractor:
select .
6. To stop the working time recording for an
implement or a tractor:
select .
CMS-I-001613
10.2.5
Checking the map type
If a job with an application map in ISO-XML format
was imported from the Farm Management
Information System to the AMATRON 3, the map type
is shown here.
Map type 1: The application map is displayed in
GPS switch and the setpoints are processed.
Map type 2: The application map is not displayed
in GPS switch, but the setpoints are processed.
CMS-I-002065
CMS-T-006643-B.1
10 | Using the job management
Editing jobs
MG5560-EN-II | E.1 | 21.04.2020
62

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English