Indexes
15
15.1
GLOSSARY
CMS-T-003880-A.1
A
AEF certificate
The AEF certificate confirms that an ISOBUS
component meets the ISOBUS standard set by AEF
and has the corresponding functions. The ISOBUS
component is therefore compatible with other certified
ISOBUS components.
Application map
Application maps contain data that can be used to
control an element of an implement. This data
includes application rates or working depths.
Attribute
A shape file contains different values saved in
columns of a table. These table columns are called
attributes and can be individually selected. For
example, different application rates for a product can
be saved in a shape file.
ASD
Automatisierte Schlagbezogene Dokumentation
(Automated Field-related Documentation). With the
ASD interface, ASD-compatible data can be imported
on the AMATRON 3. This includes e.g. data from
sensors.
Alignment angle
Describes the position of the receiver during
installation.
AUX
AUX stands for Auxiliary and refers to an additional
input device, e.g. a multi-function stick.
B
Baud rate
Data transfer rate, measured in bits per second.
C
Correction source
Correction sources are the different systems used to
improve and correct the GPS signal.
Control parameter
The control target refers to the controllable element of
the implement. On a field sprayer, the spray pressure
controller can be defined as a controllable element,
which then regulates the application rate.
D
DGPS
Differential GPS: Differential global position
determination system. A correction system increases
the precision to +/-0.5 m (0.02 m with RTK).
MG5560-EN-II | E.1 | 21.04.2020
136
To Next Page
Loading...
Need help?
General
