REQUIREMENTS
For AMABUS sprayers:
The sprayer is connected
The AMATRON 3 is started in AMABUS mode,
see page 15
Sprayer is selected in the implement menu,
see page 45
Field boundary has been created, see
page 98
For AMAZONE ISOBUS sprayers:
The sprayer is connected
The AMATRON 3 is started in ISOBUS mode,
see page 15
Field boundary has been created, see
page 98
1. Select "GPS switch" > > "Automatic boom
lowering".
2. Enter the duration of the lowering procedure in
milliseconds and confirm.
CMS-I-002017
11.2.8
Entering the GPS switch settings for seed drills
11.2.8.1 Configuring the driver assistance system
The driver assistance system supports the driver in
working the field seamlessly. Switching delays of the
seed drill and uneven forward speeds can cause
overlap or underlap in the seed rows. The driver
assistance system notifies the driver with a signal
tone and a symbol that the vehicle is approaching the
switch point and that the forward speed must be kept
constant.
The value to be entered defines the distance between
the implement and the switch point at which the driver
assistance system is enabled.
CMS-T-00004683-A.1
CMS-T-006114-A.1
11 | Using the GPS switch
Entering the basic settings for GPS switch
MG5560-EN-II | E.1 | 21.04.2020
85
To Next Page
Loading...
Need help?
General
