Amazone AMATRON 3 - Configuring Implements; Managing Implements

Configuring implements
8
8.1
Managing implements
To be able to use the GPS switch functions, the
following implements must be configured:
AMABUS implements
Implements that cannot communicate with the
terminal
Using the entered implement data, the AMATRON 3
can control the connected implement.
The following implement data must be entered:
Implement name
Implement type
Geometry data
Part-width section data
ISOBUS implements sign in automatically and do not
require configuration
CMS-T-00004675-A.1
CMS-T-001892-B.1
8 | Configuring implements
MG5560-EN-II | E.1 | 21.04.2020
42