11.2.7 Entering the GPS switch settings for sprayers
11.2.7.1 Setting the automatic boom lowering
The automatic boom lowering automatically lowers
the boom when the sprayer moves onto an unworked
area.
NOTE
The value to be entered refers to the duration of
the lowering procedure.
The correct timing of the automatic boom
lowering function depends on the following
factors:
Forward speed
Tractor equipment
Implement equipment
Lifting distance of the boom
The value for the duration of the lowering
procedure must be determined manually.
CMS-T-00004682-A.1
CMS-T-006124-A.1
11 | Using the GPS switch
Entering the basic settings for GPS switch
MG5560-EN-II | E.1 | 21.04.2020
84