Amazone AMATRON 3 User Manual

AMATRON 3 configuration
7
7.1
Entering the basic settings
7.1.1 Enabling or disabling job management
Job management can be used to process jobs in ISO-
XML format. Job management can be enabled or
disabled. Job management is disabled per default. If
job management is enabled, GPS switch can only be
used with a started job in ISO-XML format.
1. Select "Setup" > "Settings" > "Basic settings".
2. Enable or disable job management
3. Restart the AMATRON 3.
CMS-I-001209
7.1.2 Enabling or disabling ignition switching
This setting defines whether the AMATRON 3 is
coupled with the vehicle ignition.
CMS-T-00000267-B.1
CMS-T-00004672-A.1
CMS-T-004829-A.1
CMS-T-004834-A.1
7 | AMATRON 3 configuration
MG5560-EN-II | E.1 | 21.04.2020
19

Amazone AMATRON 3 Specifications

General

Brand	Amazone
Model	AMATRON 3
Category	Touch terminals
Language	English