Chapter 6 Setting Operating Environment
6-4
To set and check the method for saving the display file saved by the Copy
key:
1. Press
f2 Copy Settings
.
The dialog box shown in Figure 6.1.1-2 is displayed.
Move between setting items using the arrow keys and select the
setting.
File Type Settings:
This sets the extension of the display file.
BMP: Saves as bitmap file that can be read by most graphics
editing software
PNG: Saves as Portable Network Graphic file, which has a
smaller file size than a bmp file.
Color Settings:
This sets the screen color to be saved.
Normal: Saves as screen display image color.
Reverse: Saves as reverse-displays image
File Name Settings:
This sets the method for naming the file each time the Copy key is
pressed.
Data + sequential number (000-999):
Appends sequential number in range 000 to 999 to
Data string
User-Specified Name:
Displays file name input dialog box and input file name
2. Press
f7 Set
to change the display file save method to the value set at
step 1.
To Next Page
Loading...
