Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Pressing on Tapered Roller Bearing Inner Race
Pulling Outer Race/Tapered Roller Bearing Out of Transmission
Housing
A - Support , for example -Kukko 22/2-
B - Internal puller 46...58 mm , for example -Kukko 21/7-
Pressing in Tapered Roller Bearing Outer Race into Transmission
Housing
– Support the transmission housing with the -2050- under the
bearing mount.
Audi TT 2007 ➤
Manual Transmission - Edition 10.2009
3. Disassembly and Assembly 207
To Next Page
